Be@rPaw 1200 Windows 2000 Driver Installation
Print this page as a reference for driver installation. In order to properly install the Be@rPaw 1200 Windows 2000 driver, the original driver must be removed first. Follow these steps below to remove the old driver and install the new version. Step One - Disconnect the Scanner Make sure the scanner is not connected to the computer. Disconnect the scanner's USB plug from the USB socket. Step Two - Remove the Previous Driver Version - Click on Start, Programs, Be@rPaw 1200 and select Uninstall. Follow the prompts to remove the original driver.
Step Three - Reinstall from the CD-ROM - Insert the Be@rPaw 1200 installation CD into your CD-ROM drive and follow the prompts. If the auto run feature does not start, double-click on the My Computer icon and then right click on the CD-ROM icon. Select Open from the menu and the window will display the CD contents. Double-click on the file "Run.exe" to start the installation.
- When the installation comes to "Typical" or "Custom," choose "Custom," click "Next" and unselect the top entry, "Be@rPaw 1200 Twain Driver (30 Mbyte)."
- Click on "Next" and follow prompts to finish the installation.
Step Four - Install the Downloaded Windows 2000 Driver - Restart your computer and log in as Administrator. Make sure that you use a capital 'A' when logging in as Administrator.
- After downloading the driver, double-click the file to begin the installation and follow the installation prompts.
- When the installation is finished, you will be prompted to restart the computer. Once the computer restarts, connect the Be@rPaw 1200 to the computer's USB port. If you get a "Digital Signature Not Found" dialog box, click on "Yes" to continue with installation.
- When the installation is finished, reboot the computer one last time and the Be@rPaw 1200 should work normally.
Click here to return to the Be@rPaw 1200 driver page. |